Skip to content

Rubber V-Rings for shafts requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotates with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface. Additionally, the V Series rings have good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, and other foreign materials. V-Rings are available in both Buna N and Viton.

Description

Typical applications: Conveyor Rollers, Appliances, Motors, agriculture, wheel hubs, appliances, pumps, and gearboxes, etc.

Material?Selection?Guide

MATERIALNRSBRNBRCREPDMHNBRACMCSMSILICONEFKM
(VITON)
HARDNESS RANGE ( SHORE A)40-9035-9040-9040-8040-9040-9040-8040-8030-8050-90
HIGH TEMP C100120130130150150180150230225
LOW TEMP C-50-55-45-40-50-45-25-40-60-15
STEAMFFFPGGPEEE

E= EXCELLENT; G= GOOD; F= Fair; P= Poor; A=Available, NA= Not Available

This guide is intended for general reference Only. The materials listed are the most commonly used. There are numerous compound variations designed for specific applications for which please forward details to our engineers for a recommendation.

Reviews

There are no reviews yet.

Be the first to review “V-RINGS”

Your email address will not be published.

one × 1 =